12V Relay Remote Switch Wireless RF Remote Control Switch 4 Channel Relay Module 433Mhz Transmitter Receiver Kit Universal Remote Controller for Lights Ceiling Fan Garage Door Opener Gate Car & More

Price: $189.99 - $18.99
(as of Jun 23, 2025 18:40:07 UTC – Details)

Product Description

Aubric Wireless Remote Control Switch Kits – DC 12V 4Channel Relay Receiver & 2 433Mhz RF Transmitters, which is suitable for DIY projects for wireless remote control on lights, LED strips, garage door openers, entrance gates, motor driven curtains, cars, RVs and more.

3 different working modes for your different needs

Momentary Mode:

Press and hold the remote control button, the relay connects; when release the remote control button, the relay dis-connects. Usually used for garage door opener.

Toggle Mode:

Press once the remote control button, the relay connects; then press the same remote control button again , the relay dis-connects . Usually used for lamp or other on/off control.

Latched Mode:

Press A button on the remote control, the corresponding relay connects; then press B button on the remote control, the corresponding relay dis-connects. Usually used for one-time event safety or interlock.

DC 12V 4 Channel Relays Receiver

The DC 12 volt wireless switch is equipped with 4 channel relays that built with high stability, security and performance. 4 independent relays can either work together for polarity reversing or individually to control different electronics, such as two channels for garage door controller motor, the other two for entry lights.

3 Working Modes

Adjust the jumper position for programming. Press the learning button to pair the remote control with the receiver for 3 different working modes:

Momentary ModeToggle ModeLatched Mode

2pcs of High Quality Transmitters

The included 2 remote controls, with 433mhz wireless transmission module, transmit strong signal that can pass through walls, floors and doors, steadily control receiver from any place within a reliable distance, max range up to 164ft/50m with no obstacle.

Lights ON/ OFF Remote Control Wiring

To control light or simple actuator on and off with this wireless remote control switch, each relay can work imdependently. Just wirring the relay you want to use and pair the corresponding remote control button.

Motors Forward/ Reverse Remote Control Wiring

To control motors forwarding and reversing with this wilress remote control switch, we need to have two relays works as a group, one relay for forwarding and one relay for reversing.

Practical DIY Gadgets

The wireless relay switch can be widely used to remote control lights, lifts, boats, motor-driven curtain, roller blinds, garage door openers, gate barriers, motorcycles, vehicles, cars, trucks, RVs etc. Very practical 12V circuit remote control DIY retrofit hand-made gadget.

Easy Set Up for 3 Different Working Modes

Aubric 12V wireless relay switch is programed with 3 different working modes. Adjust the position of the jumper cap for different working modes setting.

1. Momentary Mode:

Have the jumper set as Non Lock way, that’s to say the jumper doesn’t connect any two pins.Press learning button one time > the LED indicator turns off > press any button of the remote control > indicator flashes three times > code learning succeed.Press one button is ON, loosen your finger on the same button is OFF.

2. Toggle Mode:

Have the jumper set as Self-lock way, that’s to say the jumper connects the pin2 and pin3.Press learning button one time > the LED indicator turns off > press any button of the remote control > indicator flashes three times > code learning succeed.Press one button for one time is ON, press the same button again is OFF.

3. Latched Mode:

Have the jumper set as Interlock way, that’s to say the jumper connects the pin1 and pin2.Press learning button one time > the LED indicator turns off > press any button of the remote control > indicator flashes three times > code learning succeed.Press one button is ON, press another button is OFF.

4. Pairing Removal:

Press and hold the learning button for about 6 seconds until the led indicator lights on > code removed successfully.

Wiring Connection：

Each relay has three terminal blocks: A – Normally Open, B – Common, C – Normally Closed. Each relay can work individually to control different lights or electronics. Or you can two relays to work together to control the motor’s forwarding and reversing.

Specification:

Input voltage: DC 12VWorking temperature: -40 Degree +80 DegreeReceiver sensitivity: more than -105dBmWorking frequency: 433mhzOutput voltage: DC and AC is optionalMax load current: 20AReceiver Size: 7.2 x 5.2 x 2.6cm

1. Wireless Remote Control Kits – The DC 12 volt relay switch is equipped with 4 channel wireless receiver that built with high stability, security and performance. While the included 2 remote controls transmit strong signal that can pass through walls, floors and doors, steadily control receiver from any place within a reliable distance, max range up to 164ft/50m with no obstacle.
2. Home Automation Security Relay – Learning code of 433mhz wireless transmission module has high-level security for its low repetitive rate and re-learn mode, by which it can delete the old code and re-learn a new code when a remote control get lost, so you are always in control of it.
3. Remote Relay with 3 Modes of Operation – Use a jumper to configure 3 modes of operating selection pulse / momentary, hold / toggle and latching mode. 4 independent relay channels can either work together (in latching) for polarity reversing or individually (in pulse / hold) to control different electronics, such as two channels for garage door controller motor, the other two for entry lights.
4. Easy and Flexible Switch Relay – The wireless relay kit is a perfect remote switch for those hobbyists with home automation DIY projects or business Industrial electrical. The power input voltage is 12V, and each receiver’s relay capacity is up to 20A@14VDC and 20A@125VAC.
5. Wide Applications – The wireless remote control switch can be widely used in short and long range turn devices on / off wirelessly, anti-theft alarm control panels, lifts, boats, motor-driven curtain, roller blinds, garage door openers, gate barriers, motorcycles, vehicles, cars, trucks, RVs, electric generator, electric door release locks, windows, manual switches extender, LED lighting lamp bulbs and strips, entrance and access control etc.